![]() ![]() -l: Flush the standard output after the information for each packet is printed.-n: Disable network object name resolution (such as hostname, TCP and UDP port names).The first few we’re going to be interested in are as follows The full list of options can be found here. Let’s have a look at some command line options. While we could probably write a parser for this in PowerShell, it’s not the best option. ?%\plink.exe -ssh -pw %password% "exit" ![]() If "%optionsport%"="" (set optionsport=not port 22) else (set optionsport=port %optionsport%) If NOT "%optionshost%"="" (set optionshost=and host %optionshost%) If "%wire%"="" (set wire="C:\Wireshark\Wireshark.exe") If "%password%"="" (set password=Gigaset123) Set /p wire=6.the full-path to wireshark: Set /p interface=5.interface to capture (for example, any): Set /p optionshost=4.the host for tracing (leave empty for ANY): Set /p optionsport=3.the port for tracing (leave empty for ANY): Set /p password=2.admin-password (for example, Gigaset123): Set /p ipaddress=1.IP-address from DECT Manager (for example, 192.168.178.190): Always remember that the DECT base where the call is started is sending the RTP to the outside offĮcho !!! This is used on your own risk !!!Įcho To use default values (192.168.178.190, cliadmin, any), just press ENTERĮcho Specially for the path to wireshark,Įcho it is the easiest to press enter for the standard installation path!Įcho (default: C:\Wireshark\Wireshark.exe) The device that has the role DECT Manager Integrator Base will send the SIP traffic and RTP if the handset is connected to this device. Go to the command box and confirm by entering y followed by enter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |